|
Our Quality
Standards
We
have very strict quality procedures starting from the IQC till
the shipment to our customer.
The
primary function of Quality Assurance at our factory is to support quality
objectives of OUR CUSTOMERS.
We
are using standard forms for :
The
Acceptable Quality Level ( AQL ) is defined as the maximum number of
defects per unit of a product, that for the purpose of sampling inspection
, can be considered satisfactory acceptable . These sampling plans were
most frequently used in military and now more and more consumer products
are adopting this system.
During the production, depending on the quantity of the
order our QA Team does at least three in-line audits in the factory. Our
QA People randomly choose cartons which represents all colors/sizes with
the related order in the shipment.
We
are mostly using AQL 2.5 +/-4.0 Level II for our clients. AQL 2.5 shows
us the maximum acceptable numbers of the major defects and AQL 4.0 shows
us the maximum acceptable numbers of the minor defects. If there are any
critical defects in the shipment, shipment is hold by our QA Team.
1.
CRITICAL
DEFECTS:
A
critical defect is one that judgments and experiences indicate is likely
to:
a
) Result hazardous or unsafe conditions for individuals using, or
b ) Prevent performance or tactical function of a
major end item.
2. MAJOR
DEFECTS:
A major defect is one, which is likely to result
in failure or to reduce materially the use ability of a unit of product
for its intended purpose.
3.
3.
MINOR DEFECTS:
A minor defect is one that is not likely to
reduce materially the use ability of unit of a product for its intended
purpose; or is a departure from established standards having little
bearing on the effective use, operation and performance of a unit of
product.
|
